CTT Sport, Руководство пользователя, Страница: 9 / 16

• Be certain that your CTT® Sport is charged (see charging procedures).
• Make sure that your Finger-Kick is working properly.
• Make sure that there is no other CTT® Sport, CTT®, PT3000, PT3004, or TT1000 transmitter which is ON within 20 meters from the unit that you want to pair with your Finger-Kick.
• Decide with with which dog (1 or 2) and with which preset (A or B) you want the Finger-Kick to be paired. From now on, we will call this choice of dog and preset an “option”. When pairing your Finger-Kick,
you get the easiest results when your mode on the CTT® Sport is set to rising with tone. Modes and levels are easily adjusted once your Finger-Kick is paired.
• When you press and release, you will navigate from the last used option and if you continue to press and release, you will scroll through them all. You will see when the options change because they are
marked with an icon at the left or the right sides of your transmitter. (See page 4 for diagram).
• For best results, do not cup the small CTT® Sport in your hands when pairing your Finger-Kick. Please hold it by the rotation knob or set it down on a flat surface.
• Once you have set your choice with which option you want the Finger-Kick to be linked, press and hold the program button for 15 seconds. During this time, the display will navigate two times through all
possible programs. After this navigation, the display will begin to flash. When the display is flashing, release the program button and there is a 10s window with with to pair your Finger-Kick. To pair the
Finger-Kick, press for one second and then release the Finger-Kick while the display is flashing and keeps pressing and releasing until the display stops flashing. If pairing is not successful, repeat this
procedure. If there are still problems, contact the service centre.
• To double check if the pairing was successful, press and release your program button and the display arrow will now navigate to another option. Now press your Finger-Kick. If the display jumps back to the
option where you paired the Finger-Kick, you know your Finger-Kick is paired.
• It is possible to link each option (Dog 1A, Dog 1B, and option “P”) with a Finger-Kick. After pairing a Finger-Kick to Option “P”, if you push the Finger-Kick linked to that option, you will need USB Emily to
reinstall your CTT® Sport to factory settings or to your custom settings because pushing a Finger-Kick that is paired to Option “P” will delete the possibility to use stimulation. (Note that you will need USB
Emily to install the “Disable Stimulation on Level 18” on your Chameleon® or micro collar in order to use “Option P” as a Delete Kick! To reinstall the electricity after using “Option P”, you must use Emily
because after setting install the “Disable Stimulation on Level 18” on your Chameleon® or micro collar, a Finger-Kick paired to Option “P” will delete all electricity!)
• It is possible to change the pairing of a Finger-Kick to another option. Note that a Finger-Kick can only be paired to one option at a time. The former option to which the Finger-Kick was paired will
automatically become un-paired. Anytime a Finger-Kick is re-paired to another option, on the same or on a different transmitter, the Finger-Kick will automatically wipe out past pairings.
• If a CTT®
Sport is in SOS mode, all the Finger-Kicks are automatically unpaired.
• To pair a finger-kick again to the CTT® Sport if you want to go out of SOS function, press and hold the program button for 15 seconds. The display will not scroll through the options but will stay on continuous
electricity on the level you did select for 15 seconds. The display will disappear. Release the program button and press the Finger-Kick or the Program Button again. Automatically the last Finger-Kick setting
will be re-activated. In reality, you probably need to pair a new Finger-Kick after SOS mode. To do that, see above.
HOW TO LINK (MARRY) A FINGER-KICK WITH
THE CTT® SPORT
9