
22
NAT Mode
-
When the Residential Gateway is in this mode, all devices connected to the
Residential Gateway from its LAN ports and WLAN are in the private network.
Hybrid Mode
-
When the Residential Gateway is in this mode, some devices connected to
the Residential Gateway from its LAN ports and WLAN are in the public
network and the others are in the private network.
Interface Selection
This section shows which LAN ports are on the private network (inside
NAT) and which LAN ports are on the public network (outside NAT). When a LAN port is allocated
to the private network, it is selected in its checkbox. And a device which is connected to this port
will be a host on the private network. When a LAN port is allocated to the public network, it is
unselected in the checkbox. A device which is connected to this port will be a host on the public
network.
In the
Hybrid Mode
, you can change the allocation of LAN ports. Select a LAN port in the
checkbox to allocate it to the private network. Or unselect it in the
checkbox to allocate it to the public network.
In the
Bridge Mode
, all LAN ports of the Residential Gateway will be unselected. And you
can not change the allocation of any port manually.
In the
NAT Mode
, all LAN ports of the Residential Gateway will be selected. And you can
not change the allocation of any port manually.
Host Settings
Specify the host name and the domain name of the Residential Gateway in the
text boxes. They should be provided by your Internet service provider. However, they are usually
optional and it should be fine to leave the text boxes blank.
Interface List
This section shows the basic information of the WAN interfaces of the Residential
Gateway. Below is a description of each column in the list.
ID
-
This is the index of this WAN interface in this list.
Содержание VRGIII-31412-CW-N-DR
Страница 9: ...9 Figure 1 13 Top Panel LED...