18
2.6 Bluetooth Hardware Configuration
Accessing “pairing” mode
Press “Bluetooth” button for 5 seconds approximately using paper clip or pin.
If user releases the button, IES-3106 will stays in pairing mode for 30 seconds.
NOTE:
Press button for 5 seconds approximately until LED turns GREEN
Besides pressing Bluetooth button to access pairing mode, IES-3106 itself periodically
turn into pairing mode.
IES-3106 turns un-pairable mode for 30 seconds, then turns into pairing mode for 30
seconds, and that in a loop.
Pressing “Bluetooth” button will reset this procedure until user releases button.
IES-3106 will immediately exit pairing mode if enter “connected” mode.
Note:
IES-3106 is always in slave mode.
It is recommended that you keep the wireless device searching within area where signal
can be received and wait for approximately 1~2minutes for the switch that is incapable
of being accessible.
