CTS HET-2106 SERIES, Руководство пользователя

Страница: 24 / 82

24
Switch(config)# show qos Show or verify QoS configurations.
802.1p-map example
Switch(config)# qos 802.1p-
map 6-7 3 Map priority bit 6 and 7 to queue 4.
Switch(config)# no qos
802.1p-map 6-7 Delete or remove 802.1p priority bit 6 and 7‟s mapping.
5.
Use interface command to set up default class, a tag priority to the specific queue and
ingress & egress rate limit.
QoS & Interface command Parameter Description
Switch(config)# interface
[port_list] [port_list] Enter several port numbers separating by a
comma or a range of port numbers.
For example: 1,3 or 2-4
Switch(config-if)# qos default-
class [0-3] [0-3] Specify the selected interfaces‟ default
queue.
Switch(config-if)# qos rate-
limit ingress [1-1600] [1-1600] Specify the ingress rate between 1 and
1600. The actual ingress rate will be the
ingress rate specified times 64Kbps.
Switch(config-if)# qos rate-
limit egress [0-3] [1-1600] [0-3] Specify a queue.
[1-1600] Specify a queue rate limit between 1 and
1600. The actual egress rate will be the
egress rate specified times 64Kbps.
Switch(config-if)# qos queue-
weighted [0-4] [0-4] Set up the queue weight of the selected
interfaces.
0 : The weighting is 1:1:1:1
1 : The weighting is 1:2:4:8
2 : The weighting is 1:3:6:15
3 : The weighting is 1:4:8:24
4 : The weighting is 1:5:10:35
No command
Switch(config-if)# no qos default-class Set QoS default class setting back to
defaults.
Switch(config-if)# no qos rate-limit ingress Delete QoS ingress rate limit setting.
Switch(config-if)# no qos rate-limit egress
[0-4] Specify the rate limit setting of a certain
egress queue that you want to delete or
remove.
Switch(config-if)# no qos queue-weighted Delete QoS queue weighted setting.