10
2. INSTALLATION
To properly install the WLAN Residential Gateway, please follow the procedures
listed below. Procedures covered in this chapter are described below in
separate sections.
Installation Requirements
Unpacking the WLAN Residential Gateway
Installing the WLAN Residential Gateway
Powering on the WLAN Residential Gateway
Connecting the WLAN Residential Gateway to the Network
2.1 Installation Requirements
Basic requirements for installation are as follows:
Environmental conditions
One power outlet
Proper ventilation
Proper isolation to electrical noise, radio, etc..
UTP cables should not run in the same duct with power and
phone line cords
Required SFP Transceivers, fiber cables, UTP cables or phone line
cords
2.2 Checking the Package Contents
Unpack the package carefully and check the package contents. The package
should contain the following items:
Items included in standard package:
1 WLAN Residential Gateway
1 Documentation CD
1 Power Adaptor
1 Mac ID Label
If any of the above items is found missing or damaged, please contact your local
sales representative for support or replacement.
