Instruction Booklet
HS-925
12
•
Open the seat storage box and remove the storage box. (see section 5-1 General
operation - seat storage box) Be careful of the seat falling down. (Figure 12)
•
Connect the wire and put the storage box back. Fasten the 3 screws to assemble (see
section 5-5 Disassembling your scooter-disassembling seat storage box) (Figure 13)
5-1 GERNERAL OPERATION
5.OPERATION OF SCOOTER
Battery connecting wire must be connected before using the scooter for the first
time.
•
Scooter will go into Sleep Mode with one long beep warning sound if no throttle activity
is detected for programmable time period. (Default programmable time is 10 mins.)
•
When scooter is in Sleep Mode, the LCD display will be off automatically and the scooter
will not respond to commands.
•
To wake up the scooter, turn the power (key) off and then on again.
Sleep Mode :
•
Always ensure that the scooter is switched
off before getting on or off the scooter and
before removing any items of the scooter.
•
Turning the scooter OFF whilst driving will bring
the scooter to an abrupt stop and danger.
•
Turn the key to the right - Turn scooter on.
•
Turn the key to the left - Turn scooter off.
•
Turn on the scooter, control panel will be in standby
mode. (C)
Main Key Switch :
Figure 14
Figure 13
Figure 12
•
Pull the right throttle (A) to move scooter forward. Pull the left throttle (B) to move
scooter backward. This can be reversed by local dealer if required. (Figure 15)
•
These are also your accelerator. The further you depress them, the faster you go.
(Subject to the position of speed control)
•
Releasing both left/right throttles automatically operates the brakes to slow down and
stop. Brake light will be activated and have solid red light on for 5 seconds. (see section
3 Identification of parts)
Throttle :