CTM CITY III, Руководство пользователя, Страница: 6 / 8

6 11
Page 11
Adjusting the Headstem
If the wheel and the headstem become misaligned, you can re-
adjust them. After you unlock adjustment, you can re-adjust
the headstem. Slide a hex key (aka Allen key) into the hole indi-
cated by the large red arrow and use it to loosen the hex bolt
inside.
Then, you can adjust the headstem. Try to ensure that the han-
dlebars are perpendicular to the wheel for the best effect.
Once the headstem has been adjusted, re-tighten the hex bolt
until the headstem is secure.
Note: If the handlebars are not firmly secured in place while
adjustment is locked, unlock adjustment and slightly tighten
the hex bolt indicated by the small orange arrow. Then, firmly
push the latch down until it locks and check to see if the han-
dlebars are now secure. Only tighten the bolt in small incre-
ments, checking each time to see if the handlebars are secure.