15
Pairing
The sensor and socket are factory-paired and ready to install. If re-pairing
is necessary:
Remove at least once battery from the sensor (you can get batteries ready
for the sensor, but DO NOT fit them).
1.
Give the Socket control button a quick press. Yellow LED flashes.
2.
Hold the control button on the sensor in and fit batteries in
the sensor.
3.
There are 2+2 beeps, the blue LED on the socket flashes and the
socket turns off.
4.
Release the control button on the sensor.
The sensor and socket are now paired.
NB: The sensor and socket are factory paired
and ready to install
EMERGENCY MODE
In the event of problems with the cooker guard that cannot be resolved
there and then, you can activate emergency mode, which connects power
to the cooker for 12 hours (can be repeated for a further 12 hours).
NB: All safety functions are deactivated in this period.
To activate emergency mode:
Turn the cooker fuse off and on three times at intervals of at least 1 second
for a period of 10 seconds.
Emergency mode
