15
Pairing
Emergency mode
NB: The sensor and relay are factory paired
and ready to install
Emergency mode
In the event of problems with the cooker guard that cannot be resolved
there and then, you can activate emergency mode, which connects power
to the cooker for 12 hours (can be repeated for a further 12 hours).
NB: All safety functions are deactivated in this period.
To activate emergency mode:
Remove the fuse for the cooker circuit and hold in the button on the relay
in the fuse cabinet while reinserting the fuse.
NB. The relay will beep once every 30 seconds for the first 5 minutes after
activating emergency mode.
The sensor and relay are factory-paired and ready to install. If re-pairing
is necessary:
Remove at least once battery from the sensor (you can get batteries ready
for the sensor, but DO NOT fit them).
1.
Give the relay control button a quick press. Yellow LED flashes.
2.
Hold the control button on the sensor in and fit batteries
in the sensor.
3.
There are 2+2 beeps, the blue LED on the relay flashes and the
relay turns off.
4.
Release the control button on the sensor.
The sensor and relay are now paired.
