Operating Instructions:
Maintenance Instructions:
Inspecting
This outdoor fire pit should be inspected on a regular
basis to ensure product safety and longer product life.
Check all parts to make sure they are secure.
Cleaning
This outdoor fire pit should be cleaned on a regular basis
to promote safer experiences and longer product life.
Note: After repeated use, a slight discoloration of the
finish may occur.
Reminders:
z
Do NOT attempt to clean this outdoor fire pit until the
fire is COMPLETELY out.
z
Do NOT use oven cleaner or abrasive cleaners as
they will damage this product.
z
Do NOT clean any part of this outdoor fire pit in a
self-cleaning oven as it may damage the finish.
1.
Wipe exterior surfaces of the metal parts with a mild
dishwashing detergent or baking soda.
2.
For stubborn surfaces on the metal parts, use a citrus
based degreaser and a nylon scrubbing brush.
3.
Rinse clean on the metal with water.
4.
Use a soft dry brush to wipe away the dust on the
faux stone fire pit body. Never use water or other
liquids to clean the faux stone top.
Storage
Do NOT move or store this outdoor fire pit until the
fire is COMPLETELY out.
1.
Once the fire is out, logs are cold and outdoor fire pit
is cool to the touch, remove ashes and properly
dispose.
2.
Store assembled in a location away from children
and pets.
Note: If you do not use a cover, store this outdoor fire pit
in a dry location free from rain.
Page 3 of 3, printed in China
WARNING
FOR YOUR SAFETY
Before using this outdoor fire pit, make sure you
have read, understood and are following all
information provided on page 1 of this manual.
Failure to follow those instructions can cause
death, serious injury or property damage.
Lighting:
1.
Make sure there is only a small amount of ash (1/2‰
thick) at the bottom of the metal bowl.
2.
Place a layer of dry kindling or a natural firestarter
onto the center of the log rack.
3.
Place above that layer the dry seasoned hardwood
that is cut to lengths no more than 12‰.
4.
Use a match to light kindling or firestarter.
5.
Replace the safeguard spark screen when the
kindling or firestarter is lit.
Tending the Fire
You may need to shift and/or add logs for an ideal
experience.
Reminders:
z
Always wear protective gloves or a pot holder when
tending a fire.
z
Wait until glowing wood have developed before
adding any additional wood.
z
Do NOT add gasoline, kerosene, diesel fuel, lighter
fluid or alcohol to relight or enhance an existing fire.
1.
Use a long handled fire pit tool to carefully take away
the spark screen.
2.
Use the long handled fire pit tool to shift the logs to
allow additional airflow.
3.
If additional wood is required, place wood on top of
the burning log. Be careful not to shift ashes.
4.
Replace the safeguard spark screen.
Extinguishing
1.
Allow fire to burn itself out.
2.
Do NOT use water to extinguish as this is dangerous
and can cause damage to this outdoor fire pit.
Manufactured by :
CTM International Giftwear INC.
Address:11420 Albert Hudon, Montréal, QC,
Canada H1G 3J6
