Rudi Embedded System with NVIDIA Jetson TX2, TX2i or TX1
Users Guide
Document: CTIM-00479
Revision: 0.08
Page 20 of 34
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019-04-08
Switch Description
The Rudi Embedded System has a single Power Button on the Front Faceplate.
Power Button
Function Power Button
Notes
A nearly flush switch with an easy toggle press to turn the
system on. A Blue light in the centre will indicate the
system is fully powered.
The System will turn off if the PWR button is held for
several seconds.
Reset Button
Function Reset Button
Notes
System Reset button. The button is slightly recessed so it
is protected from accidental contact. The paperclip sized
hole provides access.
Recovery Button
Function Recovery Button
Notes
Used in conjunction with the USB OTG port for
reprogramming the TX2/TX2i/TX1 onboard eMMC
drive.
By holding this button and powering on the system (or
toggling reset), the TX2/TX2i/TX1 will enter recovery
mode for reprogramming. It also turns the USB OTG
port into a target device port instead of a host port to
enable another system to discover it over USB.
