CANAM TECHNOLOGY, INC. (CTI)
MARK-IVD 800MHZ NARROWBAND SIGNAL BOOSTER M4DBDA8 USER’S MANUAL
Page 11 of 13
Rev1 May/2015
D.2
USING AND SETTING UP D.U.T
1.
Open a web browser and access the equipment by typing, in the
address bar, the IP address (
http://192.168.100.75
) assigned to the
equipment.
o
Login with username = technician, password = technician.
o
The
Main Status
page will be displayed if connection available.
2.
Go to
Calibration
page for:
o
Changing meters calibration, settings such as “Local Oscillator”,
minimum readable for some meters.
3.
Go to
Filter Settings
page for:
o
Configuring the center desired frequencies.
o
Enable/disable filter windows.
o
Setting other filters attributes as Fine-Tune, Rx Threshold,
Enable/disable AGC.
4.
Go to
Main Settings
page for:
o
Changing “Maximum Desired Output Level per Filter”.
o
Enabling/disabling MCPA output per path.
o
Enabling/disabling Pilot Test Carrier.
o
Configuring input attenuator.
