CTI COM Express PMC/XMC Lite Carrier, Руководство пользователя

Страница: 20 / 29

COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Document: CTIM-00440
Revision: 0.04
Page 20 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-09-11
DisplayPort Connector
Two Disp+ connections from the COM Express module are available and can be configured to output
DisplayPort, or HDMI/DVI through the use of the appropriate cable. The configuration of each interface is
setup via the COM Express module’s BIOS settings. Refer to the COM Express module’s documentation for
more details.
Function DisplayPort Connector
Location P3A,P3B
Type FCI Minitek Double Row 10 x 2
P/N 98414-G06-20LF
Mating 10073599-020LF
Cable CBG113
Pinout
Pin Description Pin Description
1 DP0+ 2 DP3+
3 DP0- 4 DP3-
5 GND 6 GND
7 DP1+ 8 DPAUX-
9 DP1- 10 DPAUX+
11 GND 12 GND
13 DP2+ 14 DP Hot Plug Detect
15 DP2- 16 GND
17 GND 18 GND
19 DP Power 20 DP AUX SEL
[4]
Note [4]: Cable assembly must tie high (+3.3V) for adapter output (HDMI/DVI/VGA) and low (GND) for DisplayPort output
DisplayPort-HDMI/DVI Switching
The CCG016 Disp+ connectors can be used to display outputs other than DisplayPort.
On-board switching circuitry to enable HDMI or DVI has been included. The CCG016 COM Express
DisplayPort Connectors may require a change to the COM Express BIOS to swap output formats.
Function DisplayPort Connector (HDMI/DVI Output)
Location P3A,P3B
Type FCI Minitek Double Row 10 x 2
P/N 98414-G06-20LF
Mating 10073599-020LF
Cable CBG145
Pinout Pin Description Pin Description
1 TMDS2+ 2 TMDS CLK+
3 TMDS2- 4 TMDS CLK-
5 GND 6 GND
7 TMDS1+ 8 DDC DATA
9 TMDS1- 10 DDC CLK
11 GND 12 GND
13 TMDS0+ 14 Hot Plug Detect
15 TMDS- 16 GND
17 GND 18 GND
19 +3.3V 20 DP/TMDS SEL
[5]
Note [5]: Cable assembly must tie high (+3.3V) for HDMI/DVI output