52
CTI Janus Programmable Automation Controller IOG
8.2
Application Information
This page contains information about the current application.
•
Project Name/Compile Version
•
Project Compile Timestamp
•
CTI Workbench Compiler Version
•
Session Number:
Session ID of the current session
•
Current Operational Mode
: ( APPLICATION STOP / LOGIC STOP/ RUN / ERROR )
•
Active Error Codes
: See
web page description for details.
•
System Resources:
Displays memory, file and socket utilization for the operating system.
•
Product Resources:
Displays memory, file, and socket utilization for the product.
•
Components Configured:
Indicates configuration status of fieldbus drivers and other facilities.
•
Component Errors:
Indicates components that are in an error state.
•
Non-configurable System Element Errors:
Indicates elements that are in an error state.
•
Locked Variables:
Lists variables that are locked (forced).
8.3
Configuration
8.3.1
General Settings
This page contains settings that apply to the general operation of the controller.
•
Module Identifier
- Optional 16-character text field used to identify the controller
•
Operation following Module Reset
o
Restore Last State (Default)
o
Application Stop
o
Auto-Run Cold Start,
o
Auto-Run Warm Start
o
Auto-Run Hot Start
•
Operation following Project Download from Janus Workbench
o
Application Stop - Logic programs and fieldbuses are stopped
o
Logic Stop
–
Logic programs stopped/ Fieldbuses execute (Default)
o
Run
–
Logic programs and fieldbuses execute
•
Front Panel Display Items
o
Display Primary Network IP on Front Panel
o
Display Subnet IP’s on Front Panel
(displays IP address of configured alternate subnets)
The new parameters go into effect immediately after clicking the A
PPLY
button and confirming the action.
NOTE: If both display options are disabled, the front panel alphanumeric display will be blank when no error
conditions are active.
