CTI 2500-VP15, Руководство пользователя

Страница: 15 / 58

System Setup
2.1 Starting Up
Step 1 : Install the CompactFlash Card/SSD/HDD containing Windows 7e
or XPe operating system.
Warning : Be sure to turn off the system power before inserting or
removing the CompactFlash card.
Step 2 : Connect the terminal block to 9 ~ 33V
DC
power lines. The power
lines can either be from a power adapter or an in-house power
source.
GND
-
+
Figure 2.1: Terminal Block Pin Assignment
Step 3 : Plug the power lines into the system power receptor and then turn on
the power switch.
Power Switch
G -
+
(Pin Definition for Terminal Block)
Warning : If the power lines are not connected to the correct pins, the
system may be damaged when power is turned on.
Figure 2.2: Connecting Power Lines
Note : Wait for at least 5 seconds to turn on the computer after power
goes off.
- 8 -