CTEK MULTI XS 4003 1035 Скачать руководство пользователя страница 4

4

INTRODUCTION

Congratulations on purchasing your new professional switch mode battery 

charger. This charger is included in a series of professional chargers from 

CTEK SWEDEN AB and represents the latest technology in battery charging.  

Please read this user´s manual and follow the instructions carefully.

SAFETY

• 

The charger is designed for charging 12V lead-acid batteries. Do not use the 

charger for any other purpose.

• 

Battery acid is corrosive. Rinse straight away with water if acid comes into contact 

with skin or eyes, and seek immediate medical advice.

• 

Ensure that the cabling does not jam or comes into contact with hot surfaces or 

sharp edges.

• 

A battery being charged could emit explosive gasses, which is why it is important 

to prevent sparks close to the battery. When batteries are reaching the end of their 

lifecycle internal sparks may occur. 

• 

Always provide for proper ventilation during charging.

• 

Avoid covering the charger. 

• 

Ensure that the mains cable is not exposed to water. 

• 

Never charge a frozen battery.

• 

Never charge a damaged battery.

• 

Never place the charger on top of the battery when charging.

• 

Connection to the mains supply must be in accordance with the national 

regulations for electrical installations. 

• 

Check the charger cables prior to use. Ensure that no cracks have occurred in 

the cables or in the bend protection. A charger with damaged cables must not be 

used.

• 

Always check that the charger has switched to maintenance charging mode before 

leaving the charger unattended and connected for long periods. If the charger has 

not switched to maintenance charging within 72 hours, this is an indication of an 

error. In such cases the charger must be disconnected manually.

• 

All batteries fail sooner or later. A battery that fails during charging is normally 

taken care of by the chargers advanced control, but some rare errors in the 

battery could still exist. Don’t leave any battery unattended for a longer period of 

time.

• 

This appliance is not designed for use by young children or people who cannot 

read or understand the manual unless they are under the supervision of a 

responsible person to ensure that they can use the battery charger safely. Store 

and use the battery charger out of the reach of children, and ensure that children 

cannot play with the charger. 

• 

Batteries consume water during use and charging. For batteries where water can 

be added, the water level should be checked regularly. If the water level is low add 

distilled water.

Содержание MULTI XS 4003 1035













Отзывы: