Aerial work platform
B-LIFT 18 HV
3
COD. UM0287_GB | REV. 0.0 | ED: 09/18
Chapter 7
GB
EMERGENCY MANOEUVRES
7.4
Lowering the work platform using the ground controls in the event
of operator incapacity.
In the event that the operator on the work platform is incapacitated, the emergency controls should
be used as follows (Fig. 7.2):
1)
Remove the key from inside in the turret that is fastened using a lead wire seal.
2)
Place the key in the selector switch (12) and turn it to the “Mobile Control Console” position.
3)
Activate the control switch for the required movement and at the same time use the proportional
joystick (6). Using the movement control switches with care, bring the work platform into its
rest position.
4)
When inished, place the selector switch (12) back into the central position.
5)
Remove the key from the selector switch (A) and close the cover of the external box.
14
Fig.
7.2
OBLIGATORY
Contact the Assistance Centre in order to
replace the key in the turret with a lead wire seal.
