WSU7026RC_IM_CTC
05.03.18
22
Adjust Temperature Alarm
You can set a minimum and maximum temperature at
which the appliance will emit an audio signal as soon as this
temperature is reached.
1. Hold the ALERT button down for approximately 2 sec
onds. The symbol and the temperature display of the
indoor sensor will flash.
2a Set alarm for indoor temperature:
-
Use the UP / DOWN buttons to set the maximum
temperature.
-
Confirm your entry with the ALERT button. The sym
bol and the temperature display will flash.
-
Use the UP / DOWN buttons to set the minimum
temperature.
-
Confirm your entry with the ALERT button.
2b Set the alarm for outdoor temperature:
-
Press the CH button. The symbol and the tempera
ture display for the outdoor sensor will flash.
-
Use the UP / DOWN buttons to set the maximum
temperature.
-
Confirm your entry with the ALERT button. The sym
bol and the temperature display will flash.
-
Use the UP / DOWN buttons to set the minimum
temperature.
-
Confirm your entry with the ALERT button.
The symbol indicates that the temperature alarm has
been activated.
Turn Temperature Alarm On / Off
Press the ALERT button to turn the function on or off.
Set Alarm (A1 / A2)
• Set preferences with the UP / DOWN buttons.
• Confirm preferences using the SET button.
1. Select the alarm using the MODE button.
2. While the alarm display is active, press the SET button
and hold it down for 3 seconds. The hours will begin to
blink.
3. Now adjust the hours and the minutes one after the
other.
Turn Alarm Time On / Off
While the alarm display is active, press the SET button to
turn the alarm on and off.
While the alarm is activated, the
1
and / or
2
symbol will
appear next to the normal time display.
NOTE:
As soon as the adjusted alarm time is reached, the
1
and / or
2
symbol will blink in the display. The interval of
the signal tone will increase from slow to fast.
• Deactivate Alarm Until the Following Day:
Press the UP button, or use the snooze function.
• Snooze Function (SNOOZE):
Press the SNOOZE button to switch off the signal tone
for approx. 5 minutes. The symbol will blink.
SNOOZE LIGHT Button
Press this button to briefly turn on the display light.
Cleaning
CAUTION:
Do
not
immerse the device in water.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
• Polish with a dry, soft cloth.
Technical Data
Model:..............................................................WSU 7026 RC
Temperature measurement range:
Indoor: ...................................0 °C – 50 °C (32 °F – 122 °F)
Outdoor: ............................. 20 °C – 60 °C ( 4 °F – 140 °F)
Air humidity measurement range: .......................20 % – 90 %
Battery operation:
Weather station: ........................................ 3 × 1.5 V, AA / R6
Outdoor sensor: ........................................ 2 × 1.5 V, AA / R6
Transmission frequency of transmitter: ....................433 MHz
Transmission Range: ................................ approx. 10 meters
Net weight: ..................................................... approx. 0.34 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant cur
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Notice of Directive Conformity
Hereby, CTC Clatronic International GmbH declares that the
radio equipment type WSU 7026 RC is in compliance with
Directive 2014 / 53 / EU.
The full text of the EU declaration of conformity is available
at the following internet address: www.sli24.de
In the “Download” area, please enter the model name
WSU 7026 RC.
Tested for operation in Great Britain.
Disposal
Environmental Protection
Do not dispose of the device at the end of its
service life with normal household waste. Bring it
to the official collection point for recycling. By
doing this, you help protect the environment.
