VDSL 4-band Modem Manual
CTC Union Technologies Co., Ltd
3
1. Unpacking Information
Check List
Carefully unpack the package and check its contents against the checklist.
Package Contents
z
VDSL 4-Band Modem (VDTU-101 for CO side/ VDTU-201 for CPE side)
z
Four plastic feet
z
User Manual & Utility
z
AC To DC Power Adapter
z
RJ-45 cable
z
RJ-11 cable
z
RJ-45 To D-SUB Cable(Option)
Please inform your dealer immediately for any missing, or damaged parts. If
possible, retain the carton, including the original packing materials, Use them to
repack the unit in case there is a need to return for repair.
2. Installation
Hardware Installation
This chapter describes how to install the VDTU-101 & 201 MODEM and establishes
network connections. You may install the VDTU1-101 & 201 MODEM on any level
surface (e.g, a table or shelf). However, please take note of the following minimum site
requirements before you begin.
2.1 Pre-installation Requirements
Before you start actual hardware installation, make sure you can provide the right
operating environment, including power requirements, sufficient physical space, and
proximity to other network devices that are to be connected. Verify the following
installation requirement:
z
Power requirements: DC5V/1A or above.
z
The VDTU-101 & 201 MODEM should be located in a cool dry place, with at least
10cm/4in of space at the front and back for ventilation.
z
Place the VDTU-101 & 201 MODEM out of direct sunlight, and away from heat
sources or areas with a high amount of electromagnetic interference.
z
Check if network cables and connectors needed for installation are available
