May 18, 2000
Revision Number: 2.0
SDSL Modem
8
SDTU-01/ET10
Appendix B. Command Line Interface
The command line interface allows you to change the SDSL, ATM and
Ethernet parameters, and display the status as well. Some commands must
be followed by parameters for proper configuration of the modem.
Conventionally, there shall be a “
space
” between a command and its
corresponding parameters.
The punctuation marks in the command line interface have their different
meanings. The syntax
< >
means the parameters that are enclosed are
compulsory
,
[ ]
means that the parameters are
optional
, and
|
|
between
parameters means
either….or
. In the
parameters section “ “
means that
the parameters are
Key Words.
Furthermore, after entering the password,
the screen will show the prompt as
>
for command entry.
There are two hierarchical levels in the command line interface. The
command tree below will show the user the hierarchical relationship and
commands supported:
Note 1:
When password is applied, the connection will time out after 3
minutes if there is no access to the modem. Password entering is
necessary to resume connection.
Note 2:
All settings will become effective only after being saved.
Содержание SDTU-01
Страница 1: ...Revision 2 0 User s Manual ...
