CTC Union ICR-4103 Series, Руководство пользователя

Страница: 79 / 155

79
CHAPTER 3.
WEB CONFIGURATIONS
3.9.1.4 Set up OpenVPN Custom
For Custom of VPN Mode , this section helps you use the .ovpn configuration file to quickly set
up VPN tunnel with third-party server or use the OpenVPN advance options to be compatible with
other servers.
Note:

When clicking the Import button, you can import third-party OpenVPN configuration found
from Internet and save the document into your server or PC. After importing the file, the
interface will show button to click for displaying the information and to
click for downloading the file.

For third-party OpenVPN configuration, suggest from http://www.vpngate.net/en/
Service > OpenVPN > Server VPN Mode
Item Description
Server
Client Mode Only support the Roadwarrior mode.
VPN Network The network ID for OpenVPN virtual network.
VPN Netmask The netmask for OpenVPN virtual network.
Roadwarrior:
Route Client Networks
Select from Off or On. The OpenVPN server will route the client
traffic or not. User should fill in the client IP and netmask when
this option is enabled.
NAT
1:1 NAT

Tick to enable NAT Traversal for OpenVPN. This item must be
enabled when router under NAT environment.

Select from Off or On. The default is Off.

W
hen two routers’ LAN Subnet are same and create
OpenVPN tunnels, this function is turned on.
Server- Server Security
Root CA Create Root CA key.
Cert, Key and DH Create Cert, Key and DH key.
Server- User Security
User 1 - User 8
According to your requirement, you can create different kinds of
user security key from User 1 to User 8.