CTC Union GSW-1005MS Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 58

CTC Union GSW-1005MS Скачать руководство пользователя страница 14

Chapter 3 Configuration and Operation

14

3.2.1 CLI Online Help

While using the CLI, online help is always available by using 'help' command or typing '?' (question mark).

Commands may be 'auto-completed' by pressing [TAB] and previous commands can be recalled by using the 'up/down
arrow keys'.

Note: When making corrections while typing, please be aware that unless the terminal emulation program

specifically issues a [CTRL-H] for [Backspace] that the backspace action must use the key combination of [CTRL-H] as
the [Backspace] character is not recognized by the CLI.

3.2.2 TCP/IP Configuration via CLI

3.2.2.1 IP Address, Subnet Mask, Default Router

syntax: IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]

notes: The default <vlan> for untagged packets is VID 1.
Changing the IP address from Telnet will result in disconnection. Please avoid doing this and instead use web interface.

3.2.2.2 DHCP

syntax: IP DHCP [enable|disable]

note: The DHCP client is disabled by default. To set static IP on network with DHCP server, do not enable DHCP client.

>ip setup 192.168.0.251 255.255.255.0 192.168.0.10 1
>

>?
General Commands:
-----------------
Help/?: Get help on a group or a specific command
Up    : Move one command level up
Logout: Exit CCLI

Command Groups:
---------------
System        : System settings and reset options
IP            : IP configuration and Ping
Auto Provision: Auto Provision configuration
Port          : Port management
MAC           : MAC address table
VLAN          : Virtual LAN
PVLAN         : Private VLAN
Security      : Security management
STP           : Spanning Tree Protocol
Aggr          : Link Aggregation
LACP          : Link Aggregation Control Protocol
LLDP          : Link Layer Discovery Protocol
LLDPMED       : Link Layer Discovery Protocol Media
EEE           : Energy Efficient Ethernet
Thermal       : Thermal Protection
Led_power     : LED power reduction
PoE           : Power Over Ethernet
QoS           : Quality of Service
Mirror        : Port mirroring
Config        : Load/Save of configuration via TFTP
Firmware      : Download of firmware via TFTP
UPnP          : Universal Plug and Play
MVR           : Multicast VLAN Registration
Voice VLAN    : Specific VLAN for voice traffic
Loop Protect  : Loop Protection
IPMC          : MLD/IGMP Snooping
sFlow         : sFlow Agent
VCL           : VLAN Control List

Type '<group>' to enter command group, e.g. 'port'.
Type '<group> ?' to get list of group commands, e.g. 'port ?'.
Type '<command> ?' to get help on a command, e.g. 'port mode ?'.
Commands may be abbreviated, e.g. 'por co' instead of 'port configuration'.
>

>ip dhcp disable
>

«
...
12
13
14
15
16
...
»

Содержание GSW-1005MS



























































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды