manualshive.com logo in svg

CTC Union FRM220-10/100A, Руководство пользователя

Поделиться
Скачать
CTC Union FRM220-10/100A Скачать руководство пользователя страница 35

FRM220-10/100AS-2 Operation Manual 

35 

 

5. From the Advanced Functions screen, select <4> 

Static 802.1Q VLAN

. The following 

screen will be displayed. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

6. Now leave this screen by pressing ESC. This will take us back to the 

Status and 

Configuration

 page. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

7. Select <Q>, 

Static 802.1Q VLAN Status and Configuration 

The screen will look like that on the following page. 

 
Some Tagging definitions: 

Tagged

: This means that packets exiting the assigned port will have the packets tagged with the 

VID assigned to that port. 

Untagged

: This means that any packets exiting the assigned port will have all tag information 

removed. 

Non-member

: When a port is not a member of a VID, packets tagged with that VID will not be 

allowed to exit that port. 
 

          ************************************************* 
          ***      CTC UNION TECHNOLOGIES CO., LTD.     *** 
          ***       FRM220-10/100AS-2       ver:3.016   *** 
          ************************************************* 
<< Remote A Status and Configuration >> 
NMC Action    [Inactive (Stand alone)] 
 
 <1> :Fiber 1 Status and Configuration. 
 <2> :Fiber 2 Status and Configuration. 
 <3> :UTP   3 Status and Configuration. 
 <4> :UTP   4 Status and Configuration. 
 <D> :Device  Status and Configuration. 
 <Q> :Static 802.1Q VLAN Status and Configuration. 
 <S> :Spanning Tree Status and Configuration. 
 <L> :Link Loss Forwarding Configuration. 
 <C> :Counters Status and Configuration. 
 
<ESC>:Go to Previous Menu. 

          ************************************************* 
          ***      CTC UNION TECHNOLOGIES CO., LTD.     *** 
          ***       FRM220-10/100A          ver:3.016   *** 
          ************************************************* 
<< Remote A Device Status and Configuration >> 
 <1> :Pause Frame        [Disable] 
 <2> :Advance Functions  

[Static 802.1Q VLAN]

 

 <3> :Maximum OAMPDUs Size (60 ~ 1518 Octets) [1500] 
 <4> :Accept Remote H/W Reset  [Disable] 
 <5> :UPNP                     [Disable] 
 <A> :Remote H/W Reset. 
 <L> :Load Default Settings and Write to System. 
 <R> :System Reboot. 
 
<ESC>:Go to Previous Menu. 

Содержание FRM220-10/100A































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды