CTC Union EOe-1, Руководство пользователя

Страница: 17 / 44

Chapter 1. Introduction
11
1.7 Typical System Applications
General
The
EOe-1
is not capable of fractional E1 operation and
should be used where only an unframed, transparent 2.048Kbps
transmission is available or required.
In the following application, the
EOe-1
is connected in a
point-to-point application. In this case one
EOe-1
's timing
should be set to "Internal Oscillator", while the other should be
set to "Recovery".
Figure 1.3 LAN to LAN with EOe-1 Ethernet over E1
In the following application, the
EOe-1
is connected in an
E1 network application. In this case both
EOe-1
's timing should
be set to "Recover" their timing from the E1 network.
Figure 1.4 LAN to LAN with
EOe-1
Ethernet over E1