CTC Union EcoPart 425, Руководство по установке и обслуживанию

Страница: 36 / 56

36
CTC EcoPart i425-i435 Pro
6. The heat pump is now numbered (A2).
7. To number the other heat pumps:
Energise the control and the next heat pump to be
numbered, which will be numbered pump 3 (A3).
8. Wait approx 2 minutes until the heat pump is visible in
the operational information.
9. Go to Installer/Settings/Heat pump 3 and the row
“Select/Rename Heat pump”. Press OK.
10. Press the arrow up until (A1)* is displayed. Press OK.
After pressing OK, (A1)* disappears and the “Select/
Rename Heat Pump” row darkens. The heat pump is now
numbered (A3).
*In this example, we have assumed that the heat pump
is called A1, which is the factory default. If the heat pump
has already been renumbered, then select this number
instead.
A1 A2 A1
A1 A2 A1
35
°C
40
°C
50
°C
35 °C
Operation
Heat pump 3
Compressor Permitted
Cont. brine pump on
No
Compressor stop at brine °C -5
Brine pump on 10 days Off
Select /Rename Heatpump
Heat pump 3
Compressor Permitted
Cont. brine pump on
No
Compressor stop at brine °C -5
Brine pump on 10 days Off
Select /Rename Heatpump A1