CTC Union DVS-8301, Руководство пользователя

Страница: 34 / 53

28
4.4.4 FTP Client
Use this setup page to configure capturing and sending of images to an FTP server. By using
FTP client function, you can send a video file which has been shot and recorded triggered by
the external sensor input, alarm buffer or with the built-in motion detection function to FTP
server. FTP client setting menu is composed of three tabs,
General , Alarm sending and
Periodical sending .
4.4.4.1 General
FTP client function
：
To activate the FTP client function, select On . The FTP client setting
page appears. When you do not wish to use the FTP client function, select Off .
Note
：
The frame rate and operability on the main viewer may decrease while a file is being
transmitted by the FTP client function.
FTP server name
：
Type the FTP server name to upload still images up to 64 characters, or
the IP address of the FTP server.
User name
：
Type the user name for the FTP server.
Password
：
Type the password for the FTP server.
Retype password
：
To confirm the password, type the same characters as you typed in the
Password box.
Passive mode
：
Set whether you use the passive or active mode of FTP when connecting to
FTP server. Select On to connect to FTP server using the passive mode.
Attached file type
：
Set attached file type to JPEG or MPEG-4.