ZHUHAI CTC ELECTRONIC CO. LTD
DIY PRINTER INSTALLATION AND OPERATION INSTRUCTION
38
Select the middle icon which means on-line print after slicing;
If the middle icon is shown as a saving icon after slicing, please select
“machine---machine setting” to set the port (The port should be considered as the
recommendation by computer. For example, the port is COM16 in this instruction
case)
.
Step 5: The on-line print in a success, if there is an on-line print window occurred
and the word about “Print” has been switched into boldface.
Select “Print” to heat print head and platform, the print head will return back to
the origin of coordinates when the temperature increased to the setting value. Then,
the on-line print starts to work.
6.6 Off-line Printing
Simple overview:
Open the Cura software, import the generated 3D STL file,
slice, generate the GCODE format file, save it to the TF card (customer equipped),
insert the TF card into the motherboard slot, open the printer, and enter the main page.
Select Build From SD, enter the selected print GCODE file, select, wait for the print
head, the backplane is heated to the preset temperature, printing starts until the end of
the print.
