CTC Union atu-r130, Руководство пользователя

Страница: 63 / 74

ATU-R130 ADSL Ethernet Router User’ s Guide
55
5. In the Lower Interface field, select the lower-level interface name over which this
protocol is being configured. Typically, an EOA interface is configured to operate over
an aal5 interface, such as
aal5-0 .
If you are using the ATU-R130 as a bridge only, skip to step 7.
6. If you are using the ATU-R130 as a router on your LAN, enter the IP address and
network mask you want to assign to the interface. This address serves as the public IP
address for your entire LAN and is usually assigned by your ISP.
Or, if your ISP will assign this information, click the Enable radio button to set up the DHCP
service.
Also, specify whether this interface should serve as the default route for your LAN for
accessing the Internet.
7. Click .
A confirmation page display to confirm your changes.
8. Click to return to the EOA page and view the new interface in the table.
9. Click the Admin tab, and then click
Commit & Reboot
in the task bar.
10. Click to save your changes to permanent memory.