CTB DO148, Быстрый старт Руководство пользователя, Страница: 2 / 12

NOTICE
1. Important: As active LED signals may have the potential to interfere with CAN data package
signals we do not recommend the CTB be connected to late model C.A.N. protocol vehicles
under the following conditions:
i. With a scan tool attached whilst driving the vehicle during or under road test conditions.
ii. CTB left connected to the vehicle DLC OBDII connector while road testing or left connected
to the vehicle for extended periods of time.
2. Important: Only use external test devices such as probes, oscilloscopes or diagnostic
equipment with more than 1 megaohm of input impedance.
3. Important: Do not connect the CTB when performing any vehicle re-flash or reprogramming
procedures with scan tool or pass-thru programming devices connected. Failure to observe this
can cause control module failure or damage.
4. Important: Do not use the CTB to power any external test devices in excess of 1.2 amps.
5. Important: Use caution at all times when probing the 16 pin DLC breakout box. Bridging pins,
e.g. pin 16 (POWER), to any other pin could result in serious vehicle electrical or computer
damage.
6. Important: The working and operating voltage of the CTB is 12 V to 15 V DC. Under no
circumstances should the CTB be used on any vehicle which has a higher operating voltage or
the CTB unit will be permanently damaged. For example, it cannot be used on 24 V commercial
vehicles.
7. Important: Care should be taken not to drop the CTB onto the OBD female end or to use
excessive force when connecting a scan tool, as the CTB 16 pin female DLC connector maybe
pushed in or broken. This is deemed to be operator abuse and is not a warrantable item.
Failure to observe these warnings may result in vehicle, CTB or scan tool damage or
incorrect test results.
Product Use Limitations, Warranty Disclaimer
MJ manufactures CAN Test Box (CTB) products for a number of intended uses. Please refer to the
product label for the intended use statements for specific product applications. MJ products may be
harmful or cause damage if misused incorrectly. Due care should be exercised with all MJ products
to stay within the advertised intended use at all times.
Each MJ product is shipped with documentation stating specifications and other technical information.
MJ products are warranted for a 12 month period to meet the stated specifications. MJ’s sole
obligation and the customers sole remedy is limited to replacement of products free of charge in the
event products fail to perform as warranted.
MJ makes no other warranty of any kind whatsoever, and SPECIFICALLY DISCLAIMS AND EXCLUDES
ALL OTHER WARRANTIES OF ANY KIND OR NATURE WHATSOEVER, DIRECTLY OR INDIRECTLY,
EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, AS TO THE SUITABILITY, PRODUCTIVITY,
DURABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, CONDITION, OR
ANY OTHER MATTER WITH RESPECT TO MJ PRODUCTS.
In no event shall MJ be liable for claims for any other damages, whether direct, incidental, foreseeable,
consequential, or special (including but not limited to loss of use, revenue or profit), whether based
upon warranty, contract, tort (including negligence) or strict liability arising in connection with the
sale or the failure of MJ products to perform in accordance with stated specifications.
DISCLAIMER
Please note when using the CTB as a scan tool extension lead, protocol interference may be possible
on some vehicle manufacturers when entering into some ECU’s. IMPORTANT: CTB should not be
attached when reading or clearing fault codes or during any programming, adaption or special
functions when used in conjunction with a scan tool.
CAUTION
The working and operating voltage of the CTB is 12 V to 15 V DC. Under no circumstances should
the CTB be used on any vehicle which has a higher operating voltage or the CTB unit will be
permanently damaged.