
Safety and General Information
4
Caution, Warning and Danger Decals
have been placed on the equipment to warn of potentially dangerous
situations. Care should be taken to keep this information intact and easy to read at all times. Replace missing or
damaged safety decals immediately.
Safety–Alert Symbol
This is a safety–alert symbol.
When you see this symbol on your equipment, be alert to the potential
for personal injury. This equipment is designed to be installed and operated as safely as
possible...however, hazards do exist.
Understanding Signal Words
Signal words
are used in conjunction with the safety–alert symbol to identify the severity of the warning.
DANGER
indicates an imminently hazardous situation which, if not avoided,
WILL
result in death or
serious injury.
WARNING
indicates a potentially hazardous situation which, if not avoided,
COULD
result in death or
serious injury.
CAUTION
indicates a hazardous situation which, if not avoided, MAY result in minor or moderate
injury.
Follow Safety Instructions
Carefully read all safety messages in this manual and on your equipment safety signs. Follow recommended
precautions and safe operating practices.
Keep safety signs in good condition. Replace missing or damaged safety signs.
Decal Descriptions
DANGER: Moving Auger
This decal is placed on the End Cap Weldment and Clean-out
cover. Severe personal injury will result, if the electrical
power is not disconnected, prior to servicing the equipment.
DANGER: Electrical Hazard
Disconnect electrical power before inspecting or servicing equipment unless
maintenance instructions specifically state otherwise.
Ground all electrical equipment for safety.
All electrical wiring must be done by a qualified electrician in accordance with
local and national electric codes.
Ground all non-current carrying metal parts to guard against electrical shock.
Electrical disconnects and over current protection are not supplied with the
equipment.
Safety and General Information
Содержание Chore-Time
Страница 11: ...Extension Hopper Wiring 11 MA709H Single Phase 230 V 50 60Hz w o Motor Starters Wiring...
Страница 12: ...Wiring Extension Hopper 12 MA709H Single Phase 230 V 50 60Hz w Motor Starters...
Страница 13: ...Extension Hopper Wiring 13 MA709H Three Phase 220 380 415 460 V 50 60 Hz w Motor Starters...
Страница 14: ...Part Numbers Extension Hopper 14 MA709H Part Numbers...