B. Attaching Holder to VESA
Rotate screws through VESA from
above as shown while holding hex nuts
from behind with hand until securely
tightened.
**Press lever to adjust height
**Detatch the cable tray cover. Align cable to device and along the neck down to
power surge. Replace the cable tray cover as shown.
S
S
**Using provided tool, loosen joint as
shown to adjust arm. Rotate opposite
direction to to tighten once arm is
adjusted to preferred position.
C. Adjusting Floor Stand Height
D. How to Cable Route
E. Adjusting Table Arm
F. Inserting Laptop
**Sliding open the arms of the plate,
place the laptop in position then release
the holders to grip the laptop in place
**Once laptop holder is connected to the
VESA, you will be able to turn portrait or
landscape for preferred orientation as
well as tilting for preferred angle
