888-733-4448
4. (Optional) Anchoring Base to Floor
4A. Drill (4) holes into the surface using a power drill or like (not
provided). Take the metal anchor (F) and place the casing into the
holes. Then take the screw end and rotate in with screwdriver (not
included) until securely tightened.
4B. If not anchoring into floor, use the (2) hole fillers (D) to plug in for a
more seamless look.
**Tablet and enclosure
shown for illustration,
NOT INCLUDED.
**Monitor shown for
illustration only,
NOT INCLUDED.
**Monitor shown for
illustration only,
NOT INCLUDED.
F (4)
D (4)
Assembling Enclosure to
Printer Shelf Component
Assembling Monitor to
Printer Shelf Component
Align the VESA holes of the enclosure to that of
the printer shelf component (C). Rotate in screws
(J) from above using provided allen key tool (G) as
shown until securely tightened.
Align the VESA holes of the monitor to that of the
printer shelf component (C). Rotate in screws (J)
from behind using provided allen key tool (G) as
shown until securely tightened.
(4) M5 x 12
Cable Routing
Cable Management
Unlock all (3) body unit storage compartments
using the correct key for each section. Fish the
cables through as shown and out the opening
at the very bottom as needed.
G
G
J
J
C
J
(4) M5 x 12
J
