888-733-4448
3. MOUNTING MAGNETIC PLATE AND TABLET CASE
ALIGN THE VESA HOLES ON THE MAGNETIC PLATE (D) WITH THE VESA MOUNT ON THE BASE BODY (A).
USING THE SPECIAL ALLEN KEY (H), ROTATE IN SCREWS (F) FROM THE FRONT WHILE HOLDING THE HEX
NUTS (E) FROM THE BACK BEHIND WITH FINGERS. SCREW IN UNTIL SECURELY TIGHTENED. REPEAT FOR
ALL (4) SCREWS. ONCE MAGNETIC PLATE IS ATTACHED, LAY MAGNETIC CASE ONTO THE PLATE FOR A
FLOOR STAND SETUP.
C
H
F
E
D
A
(OPTIONAL) BOLTING FLOOR STAND DOWN
USING A POWERDRILL OR SIMILAR (NOT PROVIDED) THAT IS THE SAME
SIZE AS YOUR METAL ANCHOR - CREATE A CAVITY IN THE FLOOR. INSERT
THE BASE PART OF THE METAL ANCHOR (I), AND SCREW IN THE NAIL
COMPONENT OF THE METAL ANCHOR (I) FROM ABOVE WITH A SCREW-
DRIVER (NOT PROVIDED) UNTIL SECURELY TIGHTENED. REPEAT FOR ALL
HOLES.
I
I
**Screwdriver for Illustration
Purposes Only and Not Included
