888-733-4448
5A. Align VESA holes of CTA’s enclosure with the
desk mount (A) VESA holes. With back storage
open using the included allen key tool (I), rotate
in screws (D) while holding hex nut (E) until
securely tightened.
5. How to attach a VESA compatible holder / enclosure :
**Enclosure is for illustration
purposes and not included
M
6. How to Cable Route and Accessing Back Storage Area :
6A. Unlock back storage area using keys (M). Fish through the holes your cable as shown into the back storage area. Fish through the holes
at the bottom to go into kiosk of behind the surface service areas to keep wires hidden. Place any small charging items, device or accessories
as needed as long as they fit into the space.
**Enclosures are for illustration
purposes and not included
4. Mounting desk mount to floorstand :
4A. Unlock back storage of desk mount (A)
area using keys (M).
4B. Align desk mount holes to floor stand holes and with the provided allen key tool (J) and rotate in
screws ontop of the washers (F, K) as shown.
M
A
I
M5 x 12
D
x4
x4
E
M5 Nut
A
(x4)
M6 Allen key
(x4)
F
M6 x 16
K
J
A
2A. Unlock back storage area using keys (N)
