CT PAYMENT PAX S80, Руководство по установке

Страница: 3 / 4

3
Press MENU to access the ADMIN MENU
Press 3 for SET-UP
Press 1 for OPTIONS
Enter Admin Password, press OK
NOTE: Amount for
DEBIT SURCHARGE FEE is configured by CT-Payment at the time of merchant set-up
Set MERCHANT LANGUAGE
Set APPLICATION MODE (Retail/Restaurant/Driver) using F buttons, press OK
Set TERMINAL TYPE to Debit only, credit only or both Debit and Credit using F buttons, press OK
Set TIP OPTION to ON/OFF using scroll arrows, press OK
If Tip is YES, you can set up to 3 TIP PRESET amounts
Set PRINT PREAUTH TOTAL LINE to YES/NO
Set PRINT PREUTH TIP LINE to YES/NO
Set CASH BACK option (Debit Only) to ON/OFF using scroll arrows, press OK
If Cash Back Option is set to YES you can predefine up to 3 CASHBACK PRESET amounts.
Set CASH BACK SIGNATURE LINE to ON/OFF using scroll arrows, press OK
Set ENTER LAST 4 DIGITS to activate fraud protection of swiped transactions. Set to ON/OFF using scroll arrows
Set CHECK NUMBER to OFF, Manual or Auto if tracking invoice numbers with transaction IDs, press OK
Set BACKLIGHT from 0 (dimmest) to 99 (brightest), press OK
Set BUZZER (keys beep when pressed) to ON/OFF using scroll arrows
Set requirement to press OKs BEFORE PRINT (for reports) to YES/NO
Set requirement to press OKs ON SETTLEMENT to YES/NO
Set COMP. W/O PAUTH to YES/NO
Step 1: Press MENU to access ADMIN MENU
Press 3 for SETUP
Press 1 to access OPTIONS
Enter Admin password
Scroll to APPLICATION MODE and select DVR, press cancel to exit menu
Step 2: Press MENU to access Admin MENU
Press 3 to access SETUP Options
Press 5 to access DRIVER SETUP
Enter Merchant Password
Press 1 for
CLERK OPTIONS
To ENABLE DRIVER ID choose YES/NO (if yes, close batch first)
To set DRIVER PASSWORD ID (driver will be required to enter password for transactions) choose YES/NO
Press 2 to ADD a driver
Enter a 3 digit Driver ID when prompted for ENTER DRIVER ID
Enter a 6 digit password when prompted for ENTER DRIVER
(A password is required for the set-up of a driver ID. If a password is not required when a driver processes transactions all
drivers can be set with the same password during the configuration)
PAX S80 Set-Up Guide