CT Lab Vecto III, Руководство пользователя

Страница: 38 / 80

Vecto III User Manual
38
Do not disconnect the current terminals. It requires bridging
the CT circuits and can only be done by an appointed and
certified electrician
2.4.6 Current Transducer Inputs
The Vecto III has 4 voltage-output current transducer inputs with a full-scale rating of
1.4 V
AC-RMS
. These voltage inputs can be used to directly interface with voltage-output
current sensors such as Hall-effect devices and Rogowsky coils.
The current inputs are by an 8-terminal lockable connector plug with screw terminals.
Each terminal can accommodate conductors with size up to 2.5 mm
2
.
The current transducer inputs also have a 5 V output to power Hall-effect devices or
Rogowsky coils if needed.
Figure 12: Current transducer connection