Page 6-C
6. EZT-570S Controller
NOTE:
There will be a 15 second delay prior to complete system boot up
6.1. Controller Icons and Display
The menu icon will open the main menu for navigating to the different control and monitoring
screens. Menu items will dynamically appear providing available options based on the system area
the user is in, i.e., security, data logging, setup, etc.
The information (help) icon will display text based help associated with the current screen. Help is
available in 28 languages based on the user selection in the offline setup of section of the EZT-
570S.
The home icon will return the user to the main view from anywhere in the EZT-570S application.
The alarm icon will appear and flash when a new system alarm occurs. Pressing the alarm icon will
take the user directly to the alarm screen in order to view and/or reset the active alarm condition.
The light icon allows the user to turn the chamber light(s) on and off.
The left and right navigation arrows will appear on screens that provide additional information that
the user can scroll to such as the main view screen, real time trends or program entry screen in
order to cycle through each step of a ramp/soak program.
Compressors are equipped
with crankcase heaters. After
connecting the power, the unit
must sit 4 hours before start-up to
properly heat-up.
If your chamber is equipped with
pumpdown, main power should remain on at
all times. If power is removed for extended
periods of nonuse, do not reset pumpdown
after power is applied to the unit. Only silence
the alarm. Allow for the 4 hour warm-up
period prior to use or damage to the
compressor may result.
Icon Bar
Main
Display
