CST/BERGER CST202, Инструкция по эксплуатации

Страница: 33 / 117

11.4 Outputting distance measurement data
1. Connect the total station to computer or peripheral equipment.
2. Define
【
SEND
】
in the Meas mode
（
Please see “22.3.1 defining softkeys”
），
and set
the communication baud rate
（
Please see “22.2 instrument configuration”
）
.
3. Sight the target point.
4. Press
【
Send
】
to output the distance data to computer or peripheral equipment.
Operating Display
Keys
1. Sight Target as normal practice dictates.
2
．
To take measurement, press
【
DIST
】
from
Dist.
the Meas Mode Screen. When the
Shot PC = 0
measurement starts, EDM information
ppm = 0
【
DIST
】
(distance mode, prism constant
Mode: Fine r
correction value, atmospheric
STOP
correction factor) is displayed and
“Shot” flashes.
3. A short beep sounds, and the measured
distance data(H),vertical angle(ZA),and
Dist.
【
STOP
】
horizontal angle(HAR) are displayed.
H 265.437m *
ZA 99°43′13″
Press
【
STOP
】
to quit distance
measurement and return to the Meas
mode.
HAR 120°21′12″
STOP
4. After pressing stop, measurement data
will be displayed on the Meas Mode
main screen.
MEAS.
H 265.437m
ZA 99°43′13″
HAR 120°21′12″ P1
DIST SHV HSET EDM
5. By Pressing the
【
SHV
】
key, the slope
distance “S”, horizontal distance “H” and
height difference “V” are both displayed
【
SHV
】
on the screen at the same time.
MEAS
S 269.303m
H 265.437m
V -45.469m P1
DIST SHV HSET EDM
28