Page 9 of 28
© Cambridge Silicon Radio Limited 2014
CS-310152-UGP1
www.csr.com
BlueC
or
e
A
D
K
3
.0
Subw
oo
fer
U
s
er
G
uide
3.5.
Building a Soundbar with Subwoofer Support
To build a Soundbar device from a freshly installed ADK, open the sink project included with the ADK and select
Soundbar-8670-Release
from the
Build
menu.
This sets all relevant build properties. However, if modifications to the sink project have been made for previous
builds, check that the following VM build options are included in the
Project Properties
:
SOUNDBAR
Subwoofer Link
If the
Kalimba -'sbc_decoder'
project has been modified in the past, check that
SUB_ENABLE
is included in the
Project
Properties
.
Note:
SUB_ENABLE
and
RELAY_ENABLE
cannot be used at the same time. If
RELAY_ENABLE
is defined it needs to be
undefine when defining
SUB_ENABLE
.
