HV DTemp Measurement System – Using a HV DTemp Measurement System
User Guide
31
Version 01.00 // 2021
5.3 Setting the central unit and the controller
NOTE!
i
It is recommended always to use the latest version of DTEMPconfig as
older versions may not support all functions.
The following sections contain information on the following topics:
f
Setting options for the HV DTemp-P central unit and the HV DTemp-M controller
Similar to CSMconfig, configurations in DTEMPconfig can be created both
online
and
offline
.
Online configuration
f
The measurement system is linked to the configuration software.
f
Upon completion in DTEMPconfig, a configuration can be directly transferred to the
HV DTemp Measurement System.
Offline configuration
f
There is no connection between configuration software and the central unit(s). The
configuration document is created "offline", which means without connection to the
measurement chain.
f
The configuration is transferred to the measurement chain via DTEMPconfig at a later
time, after an online connection to the measurement chain has been established.
5 3 1 Creating an offline configuration
The following sections describe the steps for configuration in offline mode. The configura-
tion data is stored in a DBC file when configuring CAN measurement modules offline. This
configuration file can be transferred to a module or a measurement chain at a later time or
made available for further use in other tools such as vMeasure exp, CANape® or INCA.
Start DTEMPconfig.
⇨
The DTEMPconfig program window opens.
Fig. 5-6: The DTEMPconfig program window
