CSL
Safe
Electronic Lock
CHANNEL
SYSTEMS LTD
全
通
系
統
有
限
公
司
地址
:
香港九龍新蒲崗大有街
2
號旺景工業大廈七樓
H
室
Add: Flat H. 7/F., Wong King Ind Building, 2 Tai Yau Street, San Po Kong, Kowloon, Hong Kong Tel:
852- 2699 9001
Fax:
852- 2329
8393
E-mail: [email protected] Website: www.channel-sys.com
P. 1
Our Ref: ML-K620M -02-201507
Contactless Card lock K620M-C1005
Operating Instructions
1. Initialization
Load batteries into the battery holder, and insert the plug of the rear panel into the socket of the front panel, and then
press the RE-SET Button until a beep, red light on and melody music sound, the lock is initialized. After initialization,
all the programmed cards are deleted.
(All the locks are already initialized when the locks leave the factory)
2. Owner Card (
1 pc
only)
Program Owner Card:
After initialization, scan the first Mifare card near the inductive area, green light on and music
sound, the programmed card is Owner card.
Change Owner Card:
Operate Step 1 Initialization, and scan the Mifare card near the inductive area, green light on and
music sound, the owner card is changed.
Note: Only one owner card is allowed for each lock, but can be programmed the same owner card for different
mifare card lock. The owner card is used to program or delete master card(s) and service card, and can not be
used to lock or unlock.
3. Master Card (
5 pcs
allowed)
Program Master Card:
Scan the owner card near the inductive area, music sound and red & green light blink (6
seconds); Scan a mifare card during the lights blink period, after the music sound (and the lights off), the programmed
card is Master card. During the red & green lights blink period, some more master cards can be programmed until
maximal 5 pcs.
Delete Some Master Card:
Scan the owner card near the inductive area, music is sounded and red & green lights blink,
then scan the master card, another music is sounded (and the lights off), the master card is deleted. (This function seldom
used)
Delete All Master Cards:
Scan the owner card near the inductive area 3 times
(Details:
Scan the owner card once and
twice, music is sounded and red & green lights blink, scan the card the third time, another music is sounded (and the
lights off)), all the master cards and the other cards (except the owner card) are all deleted.
Master Card Unlocking:
Scan the master card near the inductive area, music sound and red & green lights blink 6
seconds, a beep sound and green light on, the lock is unlocked (and the user cards are deleted after unlocked by the
master card ).
Master Card Locking:
Scan the master card near the inductive area, music sound and red light on, the lock is locked.
Note: Master card is used to program or delete user card; and also used to lock or unlock. All the user cards are
deleted after unlocked by the master card.
手持机接口
