CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER
USER'S MANUAL, VERSION 5.0
Copyright © Convergence Systems Limited, All Rights Reserved
27
Wait for the CS108 to start inventory and then you should see the RFID tags ID as shown
below. The first column is the number of reads of that tag ID, second column is the RFID tag
EPC ID, last column is the RSSI of the tag return. On the lower right, you can also see the
battery voltage at that point. When fully charged, it is around 4.2 Volts. The unit should run
to about 3.3 Volts before it stops.
At any point, if you want to stop, just press the middle center location (here showing 6366)
which is the location of the original start button, and the reader will stop inventory of RFID
tags and the screen will become like the following, where the Start button appears again:
