CSL 303577/20191119SZ090, Инструкция

Страница: 6 / 8

6
English
4. Start-up
1
Take the converter and its attachments from their packaging and remove all
packing material.
2 Connect the preferred device you want to convert to HDMI by using the Cinch
connectors.
3
Now connect an HDMI cable to the output of the converter and to a suitable
end device (e.g. TV, projector, etc.).
4
Connect the delivered USB power cable to the microUSB connector of the
converter and the USB connector (Type A) to a suitable USB port or power supply
(5V).
5
On the side of the converter you can change between 720p and 1080p with a
switch. Make sure that your device supports the corresponding resolution.
5. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair or
alteration to the device not carried out by the original supplier, will invalidate the
warranty or guarantee. The product may only be used by persons who have read
and understood these instructions. The device specifications may change without
any separate prior notice to this effect.