CSL Router Quick Guide
CSL800V2 04012018
Introduction
The CSL Router is a compact 4G Router which includes Wi-Fi and two 10/100 Ethernet ports. It is designed in a rugged
aluminium case with a click-in bracket included for wall mounting.
Installation
The CSL Router is preconfigured with the SIM already fitted in SIM1. Follow the simple steps below to ensure a quick and
reliable installation:
1.
Device location – find a suitable location with good 4G coverage and away from sources of interference i.e. monitors,
fridges, power supplies, etc.
2.
Aerial and power connections – fit the included Aerial to the rear connection port marked MAIN and power up the
Router using the supplied PSU. Once powered the front Green LEDs will indicate the device status according to the
table below.
3.
Sufficient signal strength – for best results ensure that both Green Signal Strength LEDs are ON to indicate the Router
has established good signal strength. OFF/ON LED status indicates a medium signal strength which is also acceptable.
4.
Connect devices – IP devices can now be connected using the supplied Ethernet cable or wirelessly.
Please note:
The CSL Router has an optional Wi-Fi capability which will require the CSL Router Wi-Fi Aerial (antenna) pack. Please
contact CSL Support if you wish to order the pack and utilise this feature.
The CSL Router is shipped with a single 4G antenna. The device also has an AUX connector for connection of a second
4G antenna (not supplied) to allow for antenna diversity. Antenna diversity can sometimes improve the quality and
reliability of a wireless link. Please contact CSL Support for more information.
External wall mounted High Gain Aerials are available as an optional accessory. Please contact CSL for more
information.
Back
Front
Power
SIM Status
Signal Strength
Reset
Wi-Fi Status
3G/4G Antenna
PSU Connector
Ethernet
Mounting Bracket
