CSI SMR-700/800, Руководство по установке

Страница: 5 / 36

- 1 -
Application
This guide should be applied whenever a need exists to add Digital Repeater capability to an
existing system or when this capability is being included with a new installation.
Safety Guidelines
The general safety information in this guideline applies to both operating and service personnel.
Specific warnings and cautions will be found in other parts of this manual where they apply, but
may not appear in this summary. Failure to comply with these precautions or specific warnings
elsewhere in the manual violates safety standards of design, manufacture, and intended use of
equipment. Cellular Specialties, Inc. assumes no liability for the customer’s failure to comply with
these requirements:
Grounding
This Digital Repeater system is designed to operate from 100-240 VAC @ 1.7A max. current
and should always be operated with the ground wire properly connected. Do not remove
or otherwise alter the grounding lug on the power cord.
Explosive Atmospheres
To avoid explosion or fire, do not operate this product in the presence of flammable
gases or fumes.
Lightning Danger
Do not install or make adjustments to this unit during an electrical storm. Use of a suitable
lightning arrester, such as CSI’s model number CSI-CAP, is very strongly recommended.
No User Serviceable Parts Inside
HAZARDOUS VOLTAGES ARE PRESENT WHEN THE COVER IS REMOVED. Opening the
chassis will void your warranty. If you suspect a malfunction with this product, call your dealer or
the Cellular Specialties Support Line at:
(603) 626-6677 .
The serial number may be found on the label on the panel near the power connec-
tors. Note this number below. Retain this manual, along with proof of purchase, to
serve as a permanent record of your purchase.
MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE
POINT OF SALE COMPANY
Product Registration Information
DISCLAIMER: All information and statements contained herein are accurate to the best of the knowledge of Cellular Specialties,
Inc. (CSI), but Cellular Specialties makes no warranty with respect there to, including without limitation any results that may be
obtained from the products described herein or the infringement by such products of any proprietary rights of any persons. Use or
application of such information or statements is at the users sole risk, without any liability on the part of Cellular Specialties, Inc.
Nothing herein shall be construed as licence or recommendation for use, which infringes upon any proprietary rights of any person.
Product material and specifications are subject to change without notice. Cellular Specialties’ standard terms of sale and the
specific terms of any particular sale apply.
Document Purpose / Intended Users
The purpose of this document is to provide a step-by-step procedure to help the experienced
technician/engineer install and commission an in-building wireless enhancement system using
CSI’s “Wireless Engine” Digital Repeater. Following the procedures outlined will minimize risks
associated with modifying a live system and preclude service interruptions. This document
assumes the technician/engineer understands the basic principles and functionality involved
with Repeater and in-building systems. It is geared to the practical concerns of the installer.