manualshive.com logo in svg

CSI CSI-DSP95-252-L7, Руководство по эксплуатации продукта

Поделиться
Скачать
CSI CSI-DSP95-252-L7 Скачать руководство пользователя страница 22

-22-

If a reboot of the repeater becomes neces-
sary click on the Reboot option in the 
navigation box and the  Reboot page is 
displayed.

Reboot

The Log Confi guration page provides the user with the means to modify 
three aspects of how log fi les are created and stored as shown below.

Log Confi guration

 Alarm Confi guration

The Alarm Confi guration page allows the user to specify what 
events will trigger an alarm. 

*NOTE:

  Letters, numbers & hyphens 

are the only acceptable 

nomenclature for the Location fi eld and hyphens may not be 
used as the fi rst or last character. 

 E-mail Confi guration

E-mail Confi guration page allows the user to enter up 
to fi ve E-mail addresses to which the repeater can send 
specifi ed alarm messages when the repeater is connected 
via ethernet or wireless modem and E-mail Alarm Notifi ca-
tion or Remote Networking are enabled.  

*NOTE:

  

In all 

fi elds the software will not allow the user to enter invalid 
characters.

Содержание CSI-DSP95-252-L7









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды