CSI Digital xCoder, Руководство пользователя

Страница: 7 / 49

! !!
Page!|!6! xCoder!–!User!Manual! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Aug!!18!,!2014!
Splitter Configuration Guide
Description
The Splitter is an MPTS Program De-multiplexer, and ASI/IP to IP router.
The Splitter can take IP MPTS MPEG2-TS streams from the external Ethernet input, or ASI input, VSB
Tuner, or from the output of the internal Mux. The Splitter then de-multiplexes programs in a MPTS to
individual SPTS MPEG2-TS streams. These SPTS streams can be configured to be used as inputs for
the MPE(for transcoding), or routed to the MUX, or be sent to the external IP Ethernet output of the
chassis without further processing.
The splitter can be configured with a chassis that supports up to 4 ASI inputs, and up to 4 ethernet inputs.
The splitter also features a discover mode to identify what programs exist in an incoming stream and
provide information on the stream construction and codecs.
The splitter has 8 channels in its normal configuration. Higher number of channels are available in certain
product models.
Operation
The Splitter can be accessed from HTTP user interface by selecting the “Input Splitter” name on the top
of the user interface.
The!Splitter!has!the!following!main!controls!
!
Start!:!to!turn!on!the!Splitter!Function
!
Stop!:!to!stop!the!Splitter!Function
!
Restart!:!to!restart!a!Splitter!channel!
!
Status!:!to!open!detail!real!time!stream!information!on!running!splitter!channels
!
Save!Configuration!:!save!the!configuration!of!the!Splitter!settings.!!This!is!best!done!when!the!
splitter!is!not!running.!!If!you!change!configuration!of!the!Splitter!while!running,!a!dialog!box!will!
appear!asking!if!you!want!to!save!these!new!settings.!If!yes,!the!splitter!channels!which!have!
had!configurations!changed!will!be!stopped!and!restarted!at!that!time.
!
Defaults:!If!selected,!the!user!will!be!prompted!to!set!all!channels!to!default!settings,!then!these!
can!be!saved.!!Default!settings!set!all!output!IP/ports!to!loopback!and!incremented!nonS
conflicting!ports.
! For!each!Channel,!there!are!these!parameters!to!configure
o
Input!Interface!:!ASI!or!IP!or!Tuner.!
" For IP input, multicast, unicast, and loopback address supported. Set IP to
0.0.0.0 for generic unicast input, and 127.0.0.1 for loopback input.
" 0.0.0.0 will catch all unicast inputs with a matching port .
o
Discover!=>!once!an!input!port!is!defined,!you!can!select!the!Discover!button.
After a
few seconds, a Table will appear in the “Output” section that lists all the incoming
programs on the input port. For each program, PIDs, stream type, and codec is
displayed.
o
Output Format: