CSH QG.830 Series, Инструкция по установке

Страница: 7 / 12

7
Step 4: Installing the Ladder onto the Header Board of the Loft
1. Align the ladder in the desired position in front of the opening to the loft.
2. Stand the ladder upright in the vertical stored position (see figure 10) and using
the supplied #10 x
¾
” pan-head screws , install the Flat Plate hardware. Be sure to
position the bottom of the Flat Plate along the scribed line on the header board (see
figure 11a and 11b) .
3. The ladder should now be able
to be lifted and pulled out to the
climbing position.
SPECIAL SAFETY NOTE: Our stationary
loft ladder and hardware will enable
you to get up to the loft area. To
ensure you can get up into and come
back down from the loft safely, please
install handrails firmly attached to
both the railing posts/supports in the
opening which are firmly attached to
the loft floor.
Figure 11b
Figure 10 Figure 11a