5
10. Install upper basket bracket
11. Install the larger 10mm spacers. There are (13) on the 20” and (2) on the 26”. The shorter 5mm spacer
will not be used
12. Install the handlebar stem
13. Install the top cap and torque to 5nm or until there is no play in the steering head bearings
14. Tighten stem pinch bolt but leave loose enough for adjustment
15. Using the (4) 6mm bolts, washers and nuts, install the front basket. Loosely install hardware until all (4)
are installed. Evenly tighten and readjust if necessary.
16. Make final alignment adjustments and tighten handlebar stem and pinch bolts.
