4
Hardware
Picture
Qty
Description
Used in
Step(s)
6
Large Bolt
4
5
Medium Bolt
1 & 3
4
Small Bolt
4
Large Screw
2
9
Small Screw
8
9
Large Flat
Washer
6 & 9
9
Small Flat
Washer
8
2
Large Flange
Nut
1
6
Small Flange
Nut
4
4
Large Nut
2
9
Cap Nut
8
3
Wing Nut
9
3
Reflector Stud
6
1
Wrench
1 / 3 / 4 /
7 / 8
Additional Requirements
The following items are not included, but are necessary for
the proper assembly of your heater. Do NOT attempt to
assemble without proper tools.
.
7/16” open-end wrench.
.
Philips screwdriver w/ medium blade.
.
Adjustable opening wrench.
.
Leak Detection Solution(Instructions on how to make
solution are included on page 8 )
Note: You must follow all steps to properly assemble
heater.
Installation process
Step 1 – Attach Wheel Assembly to Base
.
Line up holes in Wheel Bracket with corresponding
holes in Base, Insert 2 Medium Bolts through holes,
finger tighten 2 Large Flange Nuts.
.
Be sure that the Wheel Assembly is parallel to the
base, and fully tighten bolts.
Wheel Assembly
Step 2 – Attach Bucket to Base
Bucket
.
Slip 4 Large Screw through holes of Base.
2 Req’d Medium Bolts
2 Req’d Large Flange Nuts
4 Req’d Large Screws
4 Req’d Large Nuts
(For models without wheels, skip to step 2)
(For models without bucket, skip to step 3)
